A price per litre is an answer to a question nobody asked. Wholesale engine oil quotations differ in base oil group, additive treat rate, pack size, licence status, delivery term and payment schedule, and each moves the real cost by more than the headline price suggests. Comparing quotes without normalising those fields is how a buyer picks the cheaper offer and pays more per litre of usable oil in the tank.
The method below is not about negotiating harder. It is about putting every quote on the same basis so the comparison means something.
A grade is a viscosity band, not a product. Two suppliers quoting 15W-40 API CK-4 can be selling a Group II blend with a modest treat rate or a Group III product with a full package, and both are technically compliant with the category floor. Base oil group and treat rate are the two largest cost drivers, and they are the two fields buyers most often leave out of the enquiry.
- Viscosity grade plus the performance claims as they will appear on the label, not as they appear in the sales email.
- Base oil group: Group I, Group II, Group III or a blend. Ask for the percentage of each if the answer is a blend.
- Licence status: a licensed API product with a licence number, or an unlicensed oil that merely meets the performance level.
- Batch COA with the actual measured values, not a specification sheet with the limits only.
Without these four fields, a comparison is between products that happen to share a label. How samples should be read side by side is covered in comparing engine oil samples.
Pack size changes the delivered cost per litre twice: once in packaging and once in freight volume. A 20-litre pail and a 200-litre drum carry the same oil at very different freight per litre. Delivery term changes it again, because FOB leaves the buyer to price ocean freight, insurance, port charges and inland haulage, while CIF buries those inside the unit price.
| Condition | What to compare | What to ignore | Why |
|---|---|---|---|
| Quotes on different Incoterms | Convert all to CIF or all to DDP | The headline FOB number | Freight and insurance sit outside FOB |
| Different pack sizes | Cost per litre delivered, per SKU | Price per drum | A drum price hides volume and handling |
| Different base oil groups | Cost per litre at equal treat rate | Cost per tonne of oil | Group III costs more and performs differently |
| Different payment terms | Cost including financing of the credit period | The nominal unit price | Sixty days credit is worth real money |
| Different MOQ | Cost per litre at the volume actually needed | The MOQ price | An MOQ you cannot sell is a storage bill |
| Licensed vs unlicensed | Cost per litre of licensable product | The claim on the label | Unlicensed oil cannot carry the donut legally |
Six figures sit outside most quotations and inside the buyer’s real cost: ocean freight if the term is FOB, marine insurance, destination port charges, customs duty and VAT, inland haulage, and the cost of capital tied up between deposit and sale. A quote comparison that ignores them will systematically favour the supplier who ships FOB in small packs.
There is also shrinkage and claim risk. A drum that arrives short, a pail that leaks, a batch that fails a viscosity check on arrival: each becomes a negotiation, and the supplier with the clearest claim terms is cheaper in practice even at a higher unit price. How to judge those suppliers is set out in finding reliable bulk suppliers.
The sheet should carry, per offer: product identity, base oil group, licence number, pack size, quantity, Incoterm, unit price, freight and insurance, duty and VAT estimate, payment terms, lead time, claim terms and COA reference. Ten columns, one row per offer. The offer with the lowest number in the unit price column is rarely the lowest in the delivered cost column.
Two habits make the sheet trustworthy. First, convert every currency to one at a stated rate and date. Second, keep the assumptions visible, because a quote compared on last quarter’s freight rate is a quote compared on fiction. The structural view of how these offers are built is covered in the bulk distribution guide, and repeatability across shipments is covered in batch consistency.
If-then: if the two quotes are on different Incoterms, then convert both to CIF before reading the numbers. If one offer is unlicensed and the other licensed, then compare them as different products, not as price points. If the MOQ exceeds what the market can absorb in a quarter, then the low unit price is a storage cost. If payment terms differ by more than thirty days, then add the financing cost before ranking the offers.
Comparing three or four wholesale offers for the same grade? Send the quotations and the target market, and we will rebuild them on one basis: delivered cost per litre, licence status and batch evidence side by side.
Is the cheapest quote per litre ever the right choice?
Sometimes, when the product identity, licence status, pack size and delivery term are identical. Once any of those differ, the per-litre number is measuring different things.
Should I always ask for CIF?
Not always. CIF is easier to compare, but a buyer with its own freight arrangements may do better on FOB. What matters is that every quote is converted to the same basis.
How much does base oil group change the price?
Enough to explain most of the gap between two apparently identical offers. Group III costs more than Group II, and a higher treat rate costs more again, so the product must be fixed before the price is read.
