Shear Stability in Engine Oil
Engine Oil Insights & Industry Updates

Shear Stability in Engine Oil

Shear stability is one of the most important—and most overlooked—properties of a multigrade engine oil. When oil is squeezed through narrow gaps in the engine, especially in the bearings, pump, and between gears, the long-chain polymer molecules that give the oil its viscosity can be torn apart. This is called shear. The oil that results is thinner than it should be, and a thinner oil protects the engine less. For buyers, understanding shear stability means knowing how to choose an oil that stays close to its rated grade for the life of the oil, rather than one that quietly thins out after a few thousand kilometers.

Every modern engine moves oil under high pressure and high shear. The question is not whether shear happens—it does, in every engine—but how much viscosity the oil loses and how quickly. An oil with good shear stability loses little viscosity over its drain interval. An oil with poor shear stability can shear down a full grade, turning a 15W-40 into something closer to a 10W-30 in protection terms. That is a silent failure, because the oil still looks and feels normal to the user.

What Shear Stability Means

Shear stability is the resistance of a lubricant to a permanent decrease in viscosity when it is subjected to mechanical shear stress. It is fundamentally about the viscosity index improver (VII)—the polymer added to a multigrade oil to give it a wide temperature range. When the VII molecules are large and fragile, high shear can break them into smaller pieces. Smaller molecules contribute less to viscosity, so the oil’s kinematic viscosity falls. Because this is a permanent molecular change, it does not recover; the loss is permanent until the oil is changed.

How Multigrade Oils Work and Why They Shear

A multigrade oil such as 15W-40 works because a base oil of moderate viscosity is combined with a viscosity index improver. At low temperature the improver contributes little and the oil behaves like a light grade (15W), giving good pumpability and cold-start flow. At high temperature the polymer expands and adds viscosity, making the oil behave like a heavy single grade (40), protecting at operating temperature. The trade-off is that this polymer is the part most vulnerable to shear. The thinner the base oil and the more improver needed, the more sensitive the blend can be to shear loss. This is why the quality of the VII matters as much as the base oil.

The Tests: ASTM D6278, ASTM D7109 and Viscosity Loss

Shear stability is measured in the laboratory with standardized tests that simulate the mechanical stress an oil faces in service. The two most common methods are:

TestMethod / InstrumentWhat It MeasuresTypical Duration
ASTM D6278Conical roller bearing simulator (CEC L-45-A-99)Kinematic viscosity loss after 30 passes through a high-shear bench30 shear passes
ASTM D7109Multiple-pass / 90-cycle diesel injectorViscosity loss after repeated high-pressure injectionUp to 90 passes
KV100 before / afterKinematic viscosity at 100 °C (ASTM D445)How much the 100 °C viscosity drops after shearingPaired with the shear test

The result is usually reported as a percentage viscosity loss at 100 °C, or as the sheared viscosity value. For example, a 15W-40 with a fresh kinematic viscosity at 100 °C of 14.0 mm²/s that loses 1.4 mm²/s after shear has a viscosity loss of 10%. A lower percentage means better shear stability. Many performance specifications place an upper limit on this loss—for example, requiring that the sheared oil still meet the minimum viscosity for its SAE grade, or holding the loss below a stated percentage so the oil does not drop out of grade.

Shear Stability Index and What the Numbers Mean

A related measure is the Shear Stability Index (SSI), which expresses how much of the thickening contributed by the VII is lost under shear, on a scale from 0 to 100. A higher SSI means the polymer is more shear-sensitive and the oil loses more viscosity. A low SSI (for example below 30) indicates a shear-stable product. When you compare technical data sheets, look at three things together: the fresh 100 °C kinematic viscosity, the sheared 100 °C viscosity or percentage loss, and the SSI. An oil that stays within its SAE grade after shear—for instance, a 15W-40 that still holds at least 12.5 mm²/s at 100 °C—is behaving as it should.

Why It Matters: Oil Thinning, Fuel Economy and Protection

Shear-induced thinning has two competing effects, and this is where good data matters. On one side, a thinner oil creates less internal friction, which can slightly improve fuel economy. On the other side, a film that is too thin fails to separate moving metal parts, leading to wear, higher operating temperatures, and shorter engine life. For a heavy-duty diesel engine pulling a load, film thickness at the bearings is critical. An oil that shears down can raise bearing metal-to-metal contact. This is exactly why modern heavy-duty specifications (API CK-4, ACEA E6, E9) set limits on shear and viscosity retention—they protect the engine by preventing the oil from thinning beyond a safe point.

How Buyers Should Evaluate Shear Stability

When you choose engine oil for resale or for your own fleet, treat shear stability as a first-tier quality signal. Follow these steps:

1. Ask for the technical data sheet and find the shear test results: the method used (ASTM D6278 or D7109), the fresh and sheared 100 °C viscosity, and the percentage loss or SSI. 2. Confirm the sheared oil still meets the minimum viscosity of its SAE grade. 3. Prefer oils where the reported loss is low for the grade—for heavy-duty 15W-40 products, a loss in the single-digit to low-teens percentage is a good sign. 4. Check that the product carries an API or ACEA approval, because these approvals build shear limits into the specification. 5. Be wary of unusually cheap oils, which often use poor, shear-sensitive polymers that thin quickly in service.

Shear stability is not a marketing number. It is a measurable, testable property that decides how long an oil protects the engine. A buyer who reads the shear data chooses products that perform consistently over the drain interval, protects customers’ engines, and avoids the silent failure of an oil that quietly thins to a lower grade.