API CK-4 and CJ-4 are both heavy-duty diesel oil categories, but they are not interchangeable. CJ-4 was built for the 2007-era emission engines; CK-4 is the modern successor with stricter requirements. This guide lays out the key differences so buyers can match the right category to the right fleet.
Both are API service categories for high-speed four-stroke diesel engines. CJ-4 appeared in 2006-2007 for engines with EGR and after-treatment. CK-4 followed in 2016 as the current category for modern low-emission diesels.
- CJ-4: the 2007-era workhorse for EGR engines.
- CK-4: the 2016 successor with stricter tests.
- CK-4 is generally backward-compatible with CJ-4 engines.
- Both typically run in SAE 15W-40.
| Aspect | CJ-4 | CK-4 |
|---|---|---|
| Introduced | 2006-2007 | 2016 |
| Era of engines | EGR, early after-treatment | Modern low-emission diesel |
| Test severity | Baseline | Stricter wear and soot tests |
| Backward compatible | — | Covers CJ-4 duty |
| Status | Still stocked, legacy | Current, upgrades CJ-4 |
CK-4 is the modern upgrade and generally backward-compatible, but always confirm the OEM recommendation. If the manual calls for CK-4, do not substitute an old CJ-4 stock.
- CJ-4 is the proven, correct category for this generation.
- Look for CJ-4 in 15W-40.
- High TBN handles soot and acid in this duty.
- Move to CK-4, the modern successor.
- CK-4 covers the same duty with stricter tests.
- Match the OEM spec, not just the API category.
- Check the OEM recommendation for the exact engine.
- Confirm the category matches the emission generation.
- Verify the license number and per-batch COA.
- Match viscosity (usually 15W-40) to the climate.
CJ-4 is often cheaper and still widely stocked, which makes it tempting for older fleets. But newer engines may run better on CK-4, and a backward-compatible CK-4 covers more ground. The practical decision balances the fleet’s age, the OEM spec, and your stock risk.
Buy the category the engine needs, not the one that is cheaper to source. A modern engine on old CJ-4 is a false saving.
| Fleet Age / Duty | Best Choice | Avoid |
|---|---|---|
| 2007-2016 engines | CJ-4 15W-40 | Unnecessary upgrade cost |
| Modern low-emission diesel | CK-4 15W-40 | Old CJ-4 stock |
| Mixed fleet | CK-4 (backward compatible) | Single CJ-4 |
| Very cold climate | CK-4 5W-40 per manual | Only 15W-40 |
The category mark on the drum is only as good as the licence behind it. Read the label and check the paperwork together:
- Find the API category mark — CK-4 or CJ-4 — on the label.
- Verify the API licence number behind the mark.
- Confirm the viscosity (usually 15W-40) suits the climate.
- Check the OEM approvals on the data sheet.
- Keep the COA for every batch you receive.
A drum stamped ‘CK-4’ with no verifiable licence is a label, not a certification. Confirm the licence and the COA before you trust the mark.
For many distributors the practical question is whether to stock one or both. A single backward-compatible CK-4 often covers a mixed fleet and cuts stock risk; CJ-4 is worth stocking only where a specific older spec demands it. Match your stock to the fleets you actually serve, not to every category on the shelf.
One more distinction matters: CK-4 was designed with stricter engine protection in mind, so a modern fleet benefits even when the manual only says CJ-4. Use the newer category where the engines allow it, and the fleet gains a margin of safety against wear and soot.
We supply API CK-4 and CJ-4 heavy-duty diesel oil in 15W-40 with verified licenses, per-batch COA, and OEM spec support — request the license confirmation for your fleet.
What is the difference between CK-4 and CJ-4?
CJ-4 was built for 2007-era EGR engines; CK-4 is the 2016 successor with stricter wear and soot tests. CK-4 is generally backward-compatible with CJ-4 duty.
Is CK-4 backward compatible with CJ-4?
Yes, generally. CK-4 is designed to cover CJ-4 applications, so a mixed or modern fleet can run CK-4 across the board — but always confirm the OEM spec.
Which is better for an older fleet?
For 2007-2016 engines, CJ-4 is the proven category. CK-4 also covers it if you prefer one oil across the fleet.
Should I stock both CK-4 and CJ-4?
If your fleet is mixed, one backward-compatible CK-4 usually covers both and reduces stock risk. Stock CJ-4 only where a specific spec demands it.
What viscosity do these run at?
Usually SAE 15W-40 for heavy-duty service. Cold-climate fleets may use a lighter grade per the manual.
