BOL 0W-40 Full Synthetic Engine Oil (API SQ, ACEA C3) is a high-performance full synthetic oil for modern gasoline and diesel passenger vehicles operating under demanding conditions. It delivers strong wear protection, high-temperature stability, and a wide operating temperature range for high-output and turbocharged engines.
Its low-SAPS design supports modern emission control systems and China VIb-compliant vehicles, combining 0W cold-start performance with robust 40-grade film strength. Supplied in standard packaging for worldwide supply.
BOL 0W-40 Full Synthetic Engine Oil is a high-performance engine oil engineered for modern gasoline and diesel passenger vehicles that operate under demanding conditions. Meeting API SQ and ACEA C3 requirements, it is formulated with premium base stocks and an advanced additive system to deliver strong wear protection, high-temperature stability, and a wide operating temperature range. Its low-SAPS design supports modern emission control systems and China VIb-compliant vehicles.
Available viscosity grades: 0W-40
The 0W-40 grade combines a low cold-temperature viscosity for rapid start-up protection with a robust high-temperature viscosity for engines running under load and high heat. Superior oxidation resistance extends oil life, while effective dispersants keep engines clean. This makes it a strong choice for high-performance, turbocharged, and heavily loaded engines where consistent oil pressure and film strength matter.
| Specification Category | Rating / Approval |
|---|---|
| API Service Classification | SQ |
| ACEA European Classification | C3 |
| Application | Gasoline and diesel passenger cars; China VIb |
| Packaging | 1L, 4L, 5L, 20L, 200L |
| Property | Test Method | Typical Value |
|---|---|---|
| Kinematic Viscosity @ 100°C, mm²/s | ASTM D445 | 13.5 (representative) |
| Kinematic Viscosity @ 40°C, mm²/s | ASTM D445 | 84 (representative) |
| Viscosity Index | ASTM D2270 | 168 (representative) |
| HTHS @ 150°C, mPa·s | ASTM D4683 | 3.6 (representative) |
| Flash Point (COC), °C | ASTM D92 | 225 (representative) |
| Pour Point, °C | ASTM D97 | -39 (representative) |
| TBN, mg KOH/g | ASTM D2896 | 8.5 (representative) |